Blog, Cleaning, Facilities Management

Factory Cleaning and Why it is Important

What Exactly Is Factory Cleaning? What is the Importance of Factory Cleaning? and What are the Different Types of Factory Cleaning? These are questions we're often asked.

Why factory cleaning is essential

Factory cleaning is an important process that helps ensure the production of quality products. Dirty and dusty areas in a factory can lead to reduced efficiency, decreased product quality, and higher manufacturing costs. By keeping your factory clean, you can improve productivity and reduce environmental impact.

Cleaning your factory is essential for both the health and safety of your employees and customers. Dust, dirt, grease and other contaminants can cause serious illness if ingested or breathed in, which is why it’s important to keep your facilities clean at all times. Additionally, dirty areas make it difficult to operate machinery correctly – this can lead to missed production deadlines and lost profits. A regular cleaning schedule also preserves your equipment’s lifespan.

Textile Finishing unit setup

What exactly is factory cleaning?

Factory cleaning is the removal of unnecessary particles, contaminants, dust, and other materials from a workplace or industrial area so that they may be more efficiently used.

Factory cleaners work with specially designed equipment to safely remove these elements from the environment without negatively affecting surrounding surfaces or causing discomfort or health concerns.

Factory cleaning is important for several reasons. Dirty and dusty areas in factories can lead to decreased efficiency, decreased product quality, and higher manufacturing costs. By keeping your factory clean, you can improve productivity and reduce environmental impact:

Speed – Unclean areas in a factory can reduce the speed at which products are produced. This may result in reduced efficiency because employees may be working at a slower pace or through more difficult work conditions due to the accumulation of dust on equipment and other surfaces. Increased production costs may also be incurred as the need for additional staff is required to clean and maintain the factory.

Quality – Dirty and dusty areas can also lead to reduced product quality because particles in the air can contaminate products as they are being produced. This contamination may cause adverse reactions in consumers, resulting in lower sales or loss of market share.

Safety – Further, dirty and dusty factories often produce higher levels of harmful gases such as carbon monoxide, which can contribute to respiratory problems among employees. By cleaning up these areas, you can reduce exposure to these pollutants and protect workers’ health.

Pollution – Factory cleaning can also have a negative environmental impact. Inadequate cleanliness can result in the release of harmful materials and contaminants into the environment. This process may occur when products are manufactured or during the handling, storage, and transport of wastes generated by factory operations. By tackling these issues head-on through effective factory cleaning, you can help reduce this negative effect.

Efficiency – It keeps your production line running effectively, without the irritations and problems an unclean workplace casues. Factory cleaning can help to increase your factory’s productivity by removing contaminants and other debris from work areas. This can result in a reduction in the amount of time needed to perform certain tasks, which may ultimately improve your company’s bottom line.

2 person in white shirt standing by the table

Cleaning Methods

There are many different ways to go about cleaning a factory, depending on the specific needs of the business. Some common methods include:

Vacuums – Use of vacuum cleaners and other types of industrial machines designed for this purpose. They can be used to remove dirt, dust, and other surface contaminants from large areas or individual machines.

Cloths – Wiping down work surfaces with a cloth or mop. This method is often effective at cleaning small areas but may not be as efficient when it comes to removing larger particles or debris.

Detergents – Using detergents and sanitisers during cleaning operations. These chemicals can be used to kill germs and other contaminants on surfaces.

Water – Using a water mist system to clean high areas or walls. This approach is often effective at cleaning hard-to-reach areas, but it can also cause damage if not properly controlled.

Cleaning Factories and industry regulations

If your factory operates within specific industry regulations, then it’s important that the surfaces within the facility are clean and free of contaminants. Factory cleaning can help to meet these requirements by removing surface contaminants and debris.

In order to clean your facility properly, you will need the help of a professional. A qualified factory cleaning company will have the equipment and knowledge necessary to clean your facility effectively.

They will also be able to provide guidance on how best to use specific cleaning chemicals and methods in order to achieve the most successful results.

FM Health and Safety is central to effective facilities operations. It is key that all substances that are hazardous to health are effectively managed.

BUT WHAT DOES COSHH MEAN?

COSHH stands for ‘Control of Substances Hazardous to Health’.

RFM Chemical labels

Benefits of a Clean Factory

The benefits of a clean and organised warehouse or factory are well known. Cleanliness and organisation not only make the workplace more attractive to employees but also result in better customer service, improved stock control and a reduction of storage costs.
Factory cleaning can be an effective way to improve all of these areas while reducing your environmental impact.

Factory Cleaning: Best Practice

There are a number of ways to clean your factory or warehouse effectively and safely, but it is important to pick the right method for the job. Some common types of industrial cleaners include water-based cleaners, solvent-based cleaners, equipment care products and air purifiers.

When choosing an industrial cleaner, be sure to ask about their experience and training in this area. Many companies offer specific training programs in order to ensure that their staff are able to clean your facility effectively.

Be careful not to use too much cleaner or scrub too hard – overuse can damage your equipment and surfaces, and excessive scrubbing may remove finishes and leave residues that are difficult to clean.

A well-crafted cleaning plan will help improve the appearance, efficiency and safety of your factory or warehouse.

Warehouse and Factory Cleaning Plan

Making a factory or warehouse cleaning plan is the first step in achieving success. A plan will detail what needs to be done when it needs to be done and how much it will cost.

Keeping your workplace clean is not only important for compliance with industry regulations but also for your own health and well-being. Working in an environment that is highly cluttered or dirty can lead to stress, fatigue and even diseases such as asthma. By taking the time to properly clean your factory or warehouse, you can reduce these risks while improving worker productivity and safety. When choosing a factory cleaning company, make sure to ask about their experience and training in this area. Many companies offer specific training programs in order to ensure that their staff are able to clean your facility effectively.

There are many different types of industrial cleaners available on the market today. Be sure to choose the right type for your specific needs. Some common categories include water-based cleaners, solvent-based cleaners, equipment care products and air purifiers. Ask your chosen cleaner which type of cleaner is best suited for the particular task at hand.

Be careful not to use too much cleaner or to scrub too hard. Overuse can damage your equipment and surfaces, and excessive scrubbing may remove finishes and leave residues that are difficult to clean.

By following a well-crafted cleaning plan, you can significantly improve the appearance, efficiency and safety of your factory or warehouse.

The best equipment for factory cleaning

When it comes to choosing the right industrial cleaner, make sure you take into account the type of machinery you will be cleaning. Some cleaners are better suited for water-based machines while others are more effective on solvents-based equipment.

Be sure to test a small area first to see how the cleaner performs before committing to a large project. This way, you can avoid any unexpected complications or damage that could happen during production. When it comes to industrial cleaning machines, make sure you choose the best one for your specific needs.

Some of the most popular types of equipment include water blasters, scrubbers and vacuums. Choose the machine that will give you the results you are looking for while minimizing damage to your factory or warehouse.

seven white push mops on wall

Schedule cleaning time

Even with the best industrial cleaner, regular cleaning is still necessary to keep your equipment in good working order. Scheduling in time for factory or warehouse cleaning will help ensure that your facilities remain tidy and safe.

Choose a day when work is slow so you can devote more time to cleaning and less time to maintenance. This way, you can avoid disruptions during production and preserve the appearance of your facility. By following a regular cleaning schedule, you will ensure that your factory or warehouse is in good condition and ready for upcoming production.

Regular cleaning versus intensive cleaning If you find that your factory or warehouse is becoming untidy and cluttered, it may be time to take on an intensive cleaning project. Intensive cleaning can require more manpower and resources than regular cleaning, but the results are often worth it.

Intense cleaning will remove all the dirt, dust and debris from your facility quickly and easily. While regular cleanings may be sufficient for some factories or warehouses, intense cleaners can help restore a space to its former glory in less time.

When considering whether to undertake an intensive or regular cleanse of your factory or warehouse, consult with a professional to get the most effective results.

Consider cleanliness at every stage of the manufacturing process Ultimately, cleanliness is key at every stage of the manufacturing process. From sourcing raw materials to shipping finished products to customers, a factory or warehouse should be free from contamination and arranged in an orderly manner.

Cleaning services can help you maintain clean facilities throughout all stages of production while minimizing disruptions. By scheduling regular cleaning times, you will keep your facility running smoothly and meet customer expectations .

How to make maintaining a clean warehouse or factory part of your company culture

In order to make regular cleaning a part of your company culture, create an effective cleaning schedule and designate personnel to oversee the process.

Establish clear goals for the cleanliness of your facility and track progress regularly. This will help you identify areas where improvement is necessary and ensure that all employees are aware of their role in keeping your factory or warehouse clean.

gray industrial machine

Factory Cleaning Process

When cleaning factories, make sure you clean the entire facility, removing all debris and waste. This will ensure that dirt s not transferred across the site. It is important to clean every surface, including ceilings and floors. Use a specific cleaning method appropriate for each area of the factory or warehouse. Wipe down walls, fixtures and equipment with a clean cloth or dryer sheet. Use disinfectants to kill any bacteria that may be present in the environment.

Regular factory cleaning is an important part of maintaining a clean and organized work environment. Make sure to use the right cleaning supplies and equipment, train your staff in effective methods, and keep track of progress to ensure that the process remains efficient.

Cleaning Outside Your Facilities

It is important to keep the periphery of your factory or warehouse clean as well. This includes areas outside of the main entryway, such as loading docks and walkways. Use a similar cleaning method to that used in the interior of the building, but be especially thorough in these areas.

Cleaning on a regular basis will help ensure that your facility is free from contamination and meets customer expectations.

High-Level Factory Cleaning Tips

Factories often have areas higher than residential and office spaces. Here are a few high-level tips for effective factory cleaning:

  • Select the right cleaning supplies and equipment.
  • Be sure to use the correct type of cleaner and abrasive material for each area of the factory or warehouse.
  • Use caution when using powerful chemicals, as they can be dangerous if not used correctly.
  • Make sure all surfaces are properly cleaned before moving on to another area of the facility.

Cleaning is an important part of maintaining a clean work environment, but it cannot be done alone. Assemble a team consisting of supervisors, janitorial staff and employees responsible for specific areas of the factory to help ensure that the process is efficient and effective.

Cleaning Factory Production Lines

Production lines play a critical role in the manufacturing process. Keeping them clean and organized will help to ensure that products are produced on time and meet customer expectations. Follow these tips for effective line cleaning:

Use a consistent method of cleaning throughout the production line. This will prevent areas from becoming contaminated, and reduce the need for special cleaners or equipment. Make sure all surfaces are properly cleaned before moving to another area of the line. Use industrial-strength detergents, sodium hypochlorite (bleach) or similar chemicals if necessary to achieve complete cleanup. Be sure to move slowly and carefully through the line to avoid damaging equipment. use a dust mask and protective clothing when cleaning production lines.

Cleaning Facilities in General

Facilities play an important role in maintaining cleanliness and safety for employees and customers. Follow these tips for effective facility cleaning:

Select the right type of cleaner and equipment for each area of the facility. Use caution when using powerful chemicals, as they can be dangerous if not used correctly. Keep all surfaces properly cleaned before moving on to another part of the facility. Assemble a team consisting of supervisors, janitorial staff, employees responsible for specific areas of the facility and trained cleaning personnel. Work as a team to clean the entire facility in an efficient and effective manner.

Industrial Ovens and Bakeries

Bakeries and industrial ovens are crucial components of the production process. They are employed to cook food at high temperatures, such as pizza or bread.

Use a designated cleaning area that is separated from other oven components for efficient oven cleaning. To get rid of all dirt and stains, mix water and detergent with a powerful industrial-strength cleaner. When cleaning commercial ovens, be sure to put on gloves, goggles, and a dust mask. Before reusing the surface, let it thoroughly dry.

Dry ice equipment cleaning

Dry ice is a highly effective tool in the cleaning industry. It is used to clean and sanitize surfaces by freezing them. Follow these tips for effective dry ice equipment cleaning:

Select the appropriate cleaner and applicator for each surface. Use caution when handling cold substances, as they can be dangerous if not used correctly. Work quickly and carefully to avoid damaging the equipment or objects being cleaned. Allow the surface to dry completely before using it again.

Factory & Floor Cleaning Tips

When it comes to factory floor cleaning, there are a few key things to keep in mind. First and foremost, always use caution when working with chemicals and other potentially harmful materials. Make sure that all surfaces are properly cleaned before moving on to another area of the factory. Assemble a team consisting of supervisors, janitorial staff, employees responsible for specific areas of the facility and trained cleaning personnel. Work as a team to clean the entire factory in an efficient and effective manner.

white sedan on road during daytime

Assembly & Production Line Cleaning

Cleanliness is key in any assembly or production line setting. Follow these tips for effective assembly & production line cleaning:

  • Start by thoroughly inspecting the work area for any debris or spills.
  • Clean up any messes as soon as they occur.
  • Use a designated cleaning area that is isolated from other parts of the factory.
  • Make use of powerful industrial-strength cleaners with water and detergent to remove all debris and stains.
  • Always wear gloves, eye protection and a dust mask when cleaning areas with high levels of grease, oil or other contaminants.
  • Dry ice will also be an extremely effective tool in this type of cleaning.

Warehouse & Storage Space Cleaning

When it comes to warehouse and storage space cleaning, there are a few key things to keep in mind:

  • Ensure that all surfaces are properly cleaned before moving onto another area of the facility.
  • Always use caution when handling chemicals and other potentially harmful materials.
  • Make sure that all surfaces are properly disinfected using a bactericidal fungicide wipe or gel followed by chlorine dioxide gas if desired.

Machinery and Equipment Cleaning

It’s important to keep your machinery and equipment clean in order to ensure efficient operation. Follow these tips for effective machinery and equipment cleaning:

  • Always use caution when using hazardous chemicals or scrubbing tools.
  • Make sure that all exterior surfaces are properly cleaned before moving on to another area of the facility.
  • Always wear gloves, eye protection and a dust mask when cleaning areas with high levels of grease, oil or other contaminants.
  • Use a designated machine-cleaning area if necessary.
  • Use powerful industrial-strength cleaners with water and detergent to remove all traces of debris and stains.

Food Factory Cleaning

One of the most challenging and sensitive processes in the world is the production of food. To produce safe, high-quality products, ingredients must be handled with care and processed precisely. Food factories can therefore be very filthy and disorderly.

Food factory cleaning services will help you to clean all areas of the factory, including:

three people inside factory wearing masks and coats

Machine Cleaning and Degreasing

1. Keep your machines clean and free of the build-up to ensure efficient operation.

  1. Use degreasing agents and brushes to remove grease, oil and other contaminants from the surfaces of your machinery.
  2. Regular machine cleaning can also help extend the life of your equipment.

Industrial Waste Collection

1. Keep industrial areas clean and free of rubbish by arranging for waste collection.

  1. By recycling materials, you can help reduce the amount of harmful waste created in factories. Contact us today for a free consultation on food factory sanitising services.

PLANT ROOM CLEANING

Firstly an assessment of the plant room area to be cleaned is undertaken. This will include recommendations for future maintenance needs. Keep the environment in your plant room clean and free of chemical residues. Use high-pressure water to clean all surfaces, removing any dirt, dust or oil residue.

Cleaning the factory floor with a hose and a mop

In most cases, a standard hose and mop will be sufficient to clean the factory floor. Simply wet the floor surface with water from the hose and use the mop to scrub away dirt, dust and debris. Be sure to rinse off all dirty materials before moving on to another area of your factory.

Cleaning with detergents and high-pressure water

If your facility contains delicate or sensitive materials, it may be necessary to use a specific type of cleaning agent. While detergent solutions can be effective at removing grime and filth, they can also damage some materials if applied incorrectly. In cases like this, it’s recommended that you contact a professional industrial cleaning contractor to provide the necessary specialized equipment and guidance.

SHOT BLAST CLEANING AND HIGH-PRESSURE CLEANING – PRESSURE WASHERS

Shot blast cleaning is a powerful method used to clean areas that are difficult to reach or contain hazardous materials. By using high-pressure water and specialised cleaners, all surfaces can be cleaned quickly and safely.

High-pressure cleaning is a highly effective method used to clean dirty, greasy or oily surfaces. High-pressure and specialised cleaners quickly remove all dirt, grease and grime leaving your facility looking restored and new.

Using dry sweeping methods

In some cases, it may be more efficient to clean your factory using dry-swept methods rather than water alone. This involves moving large dust particles with a broom or duster instead of spraying them away with water. By doing this, you can avoid contact with delicate materials and minimize the chance of damage.

DRY ICE EQUIPMENT CLEANING

Dry ice is a highly effective tool in the cleaning industry. It is used to clean and sanitize surfaces by freezing them. Follow these tips for effective dry ice equipment cleaning:

Select the appropriate cleaner and applicator for each surface. Use caution when handling cold substances, as they can be dangerous if not used correctly. Work quickly and carefully to avoid damaging the equipment or objects being cleaned. Allow the surface to dry completely before using it again.

Factory Cleaning

Why Use Industrial Cleaning Services?

It is important to keep factories clean and operative at all times. An effective industrial cleaning service offers a wide range of industrial cleaning services that can address the unique needs of factories and warehouses from regular floor cleanings to special cleaning needs like chemical spills. 

Industrial Cleaning: Find the Right Service for You

Not all industrial cleaning services are the same. A cleaning company must offer a wide range of options to choose from, including regular floor cleanings, chemical spill cleanups, and even specialized cleaning needs like high-volume dust removal.

Common Issues From Minimal Factory Cleaning

Industrial cleaning is a crucial part of keeping your factory clean and functioning at its best. However, even the most diligent efforts can be thwarted if not conducted correctly. Here are some common issues that arise from less-than-professional industrial cleaning services:

  • Contacting hazardous materials: Many solvents used in industrial cleaning contain harmful chemicals that can cause serious injury if mishandled. In fact, many contractors have strict safety protocols in place to prevent just this kind of incident. If you’re unsure whether or not an individual contractor is qualified to handle your specific needs, it’s always best to contact a professional.
  • Poorly cleaned equipment: Dust and other particulate matter collect on machines over time, which can result in reduced efficiency and longer-term wear and tear on the equipment itself.
Factory Cleaning

Factory Cleaning, Things To Consider

When it comes to choosing the right industrial cleaning company for your specific needs, there are a few things you’ll want to keep in mind. Here are key factors to consider when selecting an industrial cleaning service.

Not all companies can handle every type of clean-up, so it’s important to ask about the team’s experience and capabilities. Large organizations may have dedicated staff who can handle everything from large floor cleanings to chemical spill cleanup; smaller businesses may require a more specialized approach.

How A Cleaning Contractor Can Help You Keep Your Business Running Cleanly

When it comes to keeping your business running efficiently, you can’t afford to skimp on the important clean-up tasks. That’s where professional industrial cleaning services come in handy. These companies have years of experience handling all sorts of dirty jobs, so they know exactly how to get everything clean and organized without causing any damage or inconvenience.

Factory Cleaning

Are your products harmful to humans or the environment?

Before using any cleaning products or equipment, always read the instructions and safety warnings. Some of these products may be harmful if ingested or inhaled, so make sure to use them in a safe and appropriate manner. Furthermore, all of your work must comply with local environmental regulations.

Do technicians wear full PPE?

All technicians should wear PPE when working with harsh chemicals and solvents. This includes protective clothing, eye protection, and gloves. In some cases, additional equipment, such as a face shield or chemical-resistant boots, may be required.

Factory Cleaning

Frequently Asked Questions About Factory Cleaning

What do factory cleaners do?

Factory cleaners are responsible for cleaning areas where products containing harsh chemicals and solvents are made. This can include factories, production facilities, and warehouses. They may also be called upon to clean other areas in a company that involve contact with potentially harmful substances, such as laboratories or the sales floor.

How do you keep a factory clean?

Factory cleaners use a variety of tools and techniques to clean the area. They may use buckets, mops, brooms, or scrub brushes to sweep the floor and wipe down surfaces. They may also use vacuum cleaners or dust collectors to remove dirt, debris, and contaminants. In some cases, they may also use disinfectants or sanitizing solutions to clean areas that are potentially harmful to humans or the environment.

What is industrial cleaning?

Industrial cleaning is the process of removing dirt, dust, and other contaminants from areas where dangerous or harmful substances are manufactured or processed. This can include factories, production facilities, and warehouses. It may also involve cleaning laboratories or the sales floor.

Cleaning Workstations in a Manufacturing Environment

In most cases, the workstations of factory employees are just as dirty and hazardous as the areas they work in. Most workers use their hands to handle products that contain harsh chemicals and solvents. In addition, they often walk around on dirty floors covered with dangerous objects. To clean these surfaces, factory cleaners may use a variety of techniques to remove dirt, dust particles, and other contaminants.

How can I find the best cleaning company for my factory?

Before choosing a company to clean your factory, it is important to consider the specific needs of your business. You may want to inquire about the company’s experience cleaning factories or other industrial facilities. You may also want to ask about their equipment and techniques. And finally, you should assess their prices and availability.

Which type of cleaning service should I choose: chemical, mechanical or environmental cleaning?

There is no one answer to this question. Each type of cleaning has its own advantages and disadvantages.

Chemical cleaning is the most commonly used type of industrial cleaning in the UK. It involves using harsh chemicals to remove dirt, dust, and other contaminants from surfaces. This method is effective at removing stubborn stains and odours but can be harmful if it enters contact with human skin or eyes.

Mechanical cleaning uses fluid machines to move objects around a surface area. This method is often used for floors that are difficult or impossible to clean using chemical cleaners alone.

Environmental cleanup involves removing environmental pollutants from an area. Many companies offer this type of service, but it is more expensive than other types of cleaning.

What is the best way to clean a factory?

A variety of techniques may be used to clean factory floors. One common method is dry sweeping. This process involves sweeping the floor with a broom and dustpan without wetting it. Another technique is mopping. Mopping removes moisture and dirt from the surface by using water or a cleaning solution applied directly to the floor. Rugs, mats, or pads can be placed on the floor before mopping to protect furniture from water damage. Wet vacuuming can also be used as a way to remove moisture and soil from surfaces. This process uses a high-pressure hose attached to a vacuum cleaner to suck up spills.

Which types of chemicals are used in cleaning and which ones should be avoided?

One of the most common types of industrial cleaning is using chemical cleaners. Chemical cleaners are effective at removing dirt, dust, and other contaminants from surfaces. However, these cleaners can be harmful if they enter contact with human skin or eyes. Many companies offer environmental cleanup services which involve removing pollutants from an area. While this type of cleaning is more expensive than using chemical cleaners alone, it can be a safer option for workers and the environment.

Are there any risks associated with using these chemicals in your factory?

Many of the chemicals used in industrial cleaning are safe when used appropriately. However, there is always a risk of accidents if these materials are mishandled. It is important to use caution when using these products and make sure that employees are aware of the dangers involved.

A full glossary of cleaning terms can be found in RFM Group’s Industry Terms in Cleaning Glossary.

Speak to the Property Experts...

Whether you need advice on a new project or have an existing property or portfolio - We're always happy to help. Please call or 08000 277 262 email proactive@rfm-group.com

Insight

Sign Up to our newsletter for all our latest news, views and insights.

  • This field is for validation purposes and should be left unchanged.

Share this post:

Facebook
Twitter
LinkedIn